{"id":14102,"date":"2026-03-14T09:52:40","date_gmt":"2026-03-14T08:52:40","guid":{"rendered":"https:\/\/orangeplastics.com\/the-5-most-common-injection-molding-defects-and-how-to-fix-them\/"},"modified":"2026-04-29T15:37:23","modified_gmt":"2026-04-29T13:37:23","slug":"the-5-most-common-injection-molding-defects-and-how-to-fix-them","status":"publish","type":"post","link":"https:\/\/orangeplastics.com\/en\/the-5-most-common-injection-molding-defects-and-how-to-fix-them\/","title":{"rendered":"The 5 most common injection molding defects and how to fix them"},"content":{"rendered":"\n<p>During the injection molding process, molten plastic is injected into a mold under high pressure. The material flows through the mold, fills the cavity, and solidifies within seconds. But in that short time, many things can go wrong. In this blog, we discuss the <strong>five most common injection molding defects<\/strong> and how to effectively resolve them.   <br\/><br\/><\/p>\n\n<section class=\"wp-block-qi-blocks-columns qodef-gutenberg-section qodef--template qodef-block-8b2007a2 qodef-col-num--1 qodef-col-layout--100 qodef-content--boxed\"><div class=\"qodef-section-background-overlay\"><\/div><div class=\"qodef-gutenberg-row\">\n<div class=\"wp-block-qi-blocks-column qodef-gutenberg-column qodef-block-936487f4\"><div class=\"qodef-gutenberg-column-inner\">\n<h2 class=\"wp-block-heading has-white-color has-text-color has-link-color wp-elements-a1a0cdea0b1c36de4121ddc65257ab3e\" id=\"samenvatting\" style=\"font-size:40px\">Summary<\/h2>\n\n\n\n<ul class=\"wp-block-list\">\n<li class=\"has-white-color has-text-color has-link-color wp-elements-084d846f7eb3350ef64d761bb5a6b10e\">Sink marks are caused by uneven shrinkage in thicker sections of a product and can be reduced by optimizing wall thickness and cooling<\/li>\n\n\n\n<li class=\"has-white-color has-text-color has-link-color wp-elements-14e59b6ebcf991598288009add926bae\">Flow lines are wavy patterns on the surface, usually aesthetic, and are caused by uneven cooling or low injection speed.<\/li>\n\n\n\n<li class=\"has-white-color has-text-color has-link-color wp-elements-8c8103e282e646ce45e9dcf2ad627cbb\">Short shots occur when the mold is not completely filled and can be resolved by injecting more material or adjusting gate design.<\/li>\n\n\n\n<li class=\"has-white-color has-text-color has-link-color wp-elements-67ec0bdb5e96b6def7f0396d4d0b7ded\">Burn marks are discolorations caused by overheating or trapped air and can be prevented by optimizing temperature and ventilation.<\/li>\n\n\n\n<li class=\"has-white-color has-text-color has-link-color wp-elements-36b4f94853acbe71f83de89ce44ae791\">Warping is deformation caused by uneven shrinkage and can be minimized through uniform wall thickness, symmetrical design, and optimal cooling.<\/li>\n<\/ul>\n<\/div><\/div>\n<\/div><\/section>\n\n<p><br\/><\/p>\n\n<section class=\"wp-block-qi-blocks-columns qodef-gutenberg-section qodef--template qodef-block-58f5bb9d qodef-col-num--1 qodef-col-layout--100 qodef-content--boxed\"><div class=\"qodef-section-background-overlay\"><\/div><div class=\"qodef-gutenberg-row\">\n<div class=\"wp-block-qi-blocks-column qodef-gutenberg-column qodef-block-59dc7068\"><div class=\"qodef-gutenberg-column-inner\">\n<div class=\"wp-block-rank-math-toc-block\" id=\"rank-math-toc\"><h3>Table of contents<\/h3><nav><ul><li class=\"\"><a href=\"#samenvatting\">Summary<\/a><\/li><li class=\"\"><a href=\"#hoe-werkt-spuitgieten\">\n1. Sink Marks<\/a><\/li><li class=\"\"><a href=\"#hoe-werkt-spuitgieten-1\">\n2. Flow Lines<\/a><\/li><li class=\"\"><a href=\"#hoe-werkt-spuitgieten-1-1\">\n3. Short shot<\/a><\/li><li class=\"\"><a href=\"#hoe-werkt-spuitgieten-1-1-1\">\n4. Burn marks<\/a><\/li><li class=\"\"><a href=\"#hoe-werkt-spuitgieten-1-1-1-1\">\n5. Warping<\/a><\/li><li class=\"\"><a href=\"#hoe-kies-je-de-juiste-matrijs-en-machine\">\nPrevention: the bigger picture<\/a><\/li><li class=\"\"><a href=\"#conclusie\">\nConclusion<\/a><\/li><\/ul><\/nav><\/div>\n<\/div><\/div>\n<\/div><\/section>\n\n<h2 class=\"wp-block-heading\" id=\"hoe-werkt-spuitgieten\" style=\"font-size:40px\"><br\/>1. Sink Marks<\/h2>\n\n<p>Sink marks are a common quality issue in injection molding and can negatively affect both the appearance and dimensional stability of a product. They often appear subtly but usually indicate underlying problems in design or process settings. In this section, we explain what sink marks are, what causes them, and how they can be effectively prevented or resolved.  <\/p>\n\n<h3 class=\"wp-block-heading\" id=\"1-smelten-van-het-kunststofgranulaat-1\" style=\"font-size:30px\">What are sink marks?<\/h3>\n\n<p>Sink marks are <strong>small depressions or craters<\/strong> that appear in thicker sections of a product. They are caused by the inner material shrinking more rapidly during the cooling process. <\/p>\n\n<h3 class=\"wp-block-heading\" id=\"1-smelten-van-het-kunststofgranulaat-1-1\" style=\"font-size:30px\">What causes them?<\/h3>\n\n<p>Sink marks can be caused by the following:<\/p>\n\n<ul class=\"wp-block-list\">\n<li>Uneven wall thickness<\/li>\n\n\n\n<li>Insufficient cooling<\/li>\n\n\n\n<li>Low injection pressure<\/li>\n\n\n\n<li>Excessively high temperature near the gate<\/li>\n<\/ul>\n\n<h3 class=\"wp-block-heading\" id=\"1-smelten-van-het-kunststofgranulaat-1-1-1\" style=\"font-size:30px\">How do you fix them?<\/h3>\n\n<p>The sink marks can be resolved by:<\/p>\n\n<ul class=\"wp-block-list\">\n<li>Optimizing the cooling process (time and temperature)<\/li>\n\n\n\n<li>Adjusting the wall thickness in the product design<\/li>\n<\/ul>\n\n<figure class=\"wp-block-image size-large\"><img fetchpriority=\"high\" decoding=\"async\" width=\"1024\" height=\"547\" src=\"https:\/\/orangeplastics.com\/wp-content\/uploads\/2026\/03\/SinkMarks_Voorbeeld_OrangePlastics-1024x547.jpg\" alt=\"\" class=\"wp-image-13880\" srcset=\"https:\/\/orangeplastics.com\/wp-content\/uploads\/2026\/03\/SinkMarks_Voorbeeld_OrangePlastics-1024x547.jpg 1024w, https:\/\/orangeplastics.com\/wp-content\/uploads\/2026\/03\/SinkMarks_Voorbeeld_OrangePlastics-300x160.jpg 300w, https:\/\/orangeplastics.com\/wp-content\/uploads\/2026\/03\/SinkMarks_Voorbeeld_OrangePlastics-768x410.jpg 768w, https:\/\/orangeplastics.com\/wp-content\/uploads\/2026\/03\/SinkMarks_Voorbeeld_OrangePlastics-1536x820.jpg 1536w, https:\/\/orangeplastics.com\/wp-content\/uploads\/2026\/03\/SinkMarks_Voorbeeld_OrangePlastics.jpg 1917w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n<p><em>Example of an injection molding defect: sink marks<\/em><\/p>\n\n<h2 class=\"wp-block-heading\" id=\"hoe-werkt-spuitgieten-1\" style=\"font-size:40px\"><br\/>2. Flow Lines<\/h2>\n\n<p>Flow lines are a common visual phenomenon in injection molded products and are especially noticeable due to their distinct pattern or color variation. Although they usually do not affect the strength of the product, they can be undesirable for parts with high aesthetic requirements. In this section, we explain how to recognize flow lines, what causes them, and which measures can be taken to prevent or reduce them.  <\/p>\n\n<h3 class=\"wp-block-heading\" id=\"1-smelten-van-het-kunststofgranulaat\" style=\"font-size:30px\">How do you recognize flow lines?<\/h3>\n\n<p>Flow lines appear as <strong>wavy patterns<\/strong>, often in a slightly different shade than the rest of the product. They typically occur in narrow sections of the mold. <\/p>\n\n<h3 class=\"wp-block-heading\" id=\"1-smelten-van-het-kunststofgranulaat-1-1-1-1\" style=\"font-size:30px\">Are they harmful?<\/h3>\n\n<p>Usually not. Flow lines rarely affect the structural integrity, but they can negatively impact the product\u2019s appearance. <\/p>\n\n<h3 class=\"wp-block-heading\" id=\"1-smelten-van-het-kunststofgranulaat-1-1-1-1-1\" style=\"font-size:30px\">Causes<\/h3>\n\n<p>The causes of flow lines include:<\/p>\n\n<ul class=\"wp-block-list\">\n<li>Uneven cooling<\/li>\n\n\n\n<li>Temperature that is too low<\/li>\n\n\n\n<li>Injection speed that is too low<\/li>\n\n\n\n<li>Incorrect material selection<\/li>\n\n\n\n<li>Colorants<\/li>\n\n\n\n<li>Geometry<\/li>\n<\/ul>\n\n<h3 class=\"wp-block-heading\" id=\"1-smelten-van-het-kunststofgranulaat-1-1-1-1-1-1\" style=\"font-size:30px\">Solutions<\/h3>\n\n<p>Solutions for flow lines include:<\/p>\n\n<ul class=\"wp-block-list\">\n<li>Increase the temperature<\/li>\n\n\n\n<li>Increase the injection speed<\/li>\n\n\n\n<li>Consider using a different type of plastic<\/li>\n\n\n\n<li>Adjust the product design<\/li>\n\n\n\n<li>Perform a mold flow analysis to detect issues in advance<\/li>\n<\/ul>\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" width=\"1024\" height=\"547\" src=\"https:\/\/orangeplastics.com\/wp-content\/uploads\/2026\/03\/FlowLines_Voorbeeld_OrangePlastics-1024x547.jpg\" alt=\"\" class=\"wp-image-13878\" srcset=\"https:\/\/orangeplastics.com\/wp-content\/uploads\/2026\/03\/FlowLines_Voorbeeld_OrangePlastics-1024x547.jpg 1024w, https:\/\/orangeplastics.com\/wp-content\/uploads\/2026\/03\/FlowLines_Voorbeeld_OrangePlastics-300x160.jpg 300w, https:\/\/orangeplastics.com\/wp-content\/uploads\/2026\/03\/FlowLines_Voorbeeld_OrangePlastics-768x410.jpg 768w, https:\/\/orangeplastics.com\/wp-content\/uploads\/2026\/03\/FlowLines_Voorbeeld_OrangePlastics-1536x820.jpg 1536w, https:\/\/orangeplastics.com\/wp-content\/uploads\/2026\/03\/FlowLines_Voorbeeld_OrangePlastics.jpg 1917w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n<p><em>Example of injection molding defect: flow lines<\/em><\/p>\n\n<h2 class=\"wp-block-heading\" id=\"hoe-werkt-spuitgieten-1-1\" style=\"font-size:40px\"><br\/>3. Short shot<\/h2>\n\n<p>A short shot is a clear and often immediately visible injection molding defect that indicates a disruption in the mold filling process. This defect can severely affect both the appearance and functionality of the product. In this section, we explain what a short shot is, what causes it, and how it can be effectively resolved.  <\/p>\n\n<h3 class=\"wp-block-heading\" id=\"1-smelten-van-het-kunststofgranulaat-1-1-1-1-1-1-1\" style=\"font-size:30px\">What is a short shot?<\/h3>\n\n<p>A short shot occurs when the molten plastic does not completely fill the mold, resulting in an <strong>incomplete product.<\/strong> <\/p>\n\n<h3 class=\"wp-block-heading\" id=\"1-smelten-van-het-kunststofgranulaat-1-1-1-1-2\" style=\"font-size:30px\">Possible causes<\/h3>\n\n<p>The causes of a short shot include:<\/p>\n\n<ul class=\"wp-block-list\">\n<li>Insufficient injected material<\/li>\n\n\n\n<li>Gates that are too narrow in the mold design<\/li>\n\n\n\n<li>Material with excessively high viscosity<\/li>\n\n\n\n<li>A mold that\u2019s too cold, causing the plastic to solidify too quickly<\/li>\n<\/ul>\n\n<h3 class=\"wp-block-heading\" id=\"1-smelten-van-het-kunststofgranulaat-1-1-1-1-2-1\" style=\"font-size:30px\">Solutions<\/h3>\n\n<p>Short shots can be resolved by:<\/p>\n\n<ul class=\"wp-block-list\">\n<li>Increasing the amount of injected material<\/li>\n\n\n\n<li>Adjusting the mold design (wider gates)<\/li>\n\n\n\n<li>Choosing a plastic with better flow properties<\/li>\n\n\n\n<li>Optimizing the mold temperature<\/li>\n<\/ul>\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" width=\"1024\" height=\"550\" src=\"https:\/\/orangeplastics.com\/wp-content\/uploads\/2026\/03\/ShortShot_Voorbeeld_OrangePlastics-1024x550.jpg\" alt=\"\" class=\"wp-image-13882\" srcset=\"https:\/\/orangeplastics.com\/wp-content\/uploads\/2026\/03\/ShortShot_Voorbeeld_OrangePlastics-1024x550.jpg 1024w, https:\/\/orangeplastics.com\/wp-content\/uploads\/2026\/03\/ShortShot_Voorbeeld_OrangePlastics-300x161.jpg 300w, https:\/\/orangeplastics.com\/wp-content\/uploads\/2026\/03\/ShortShot_Voorbeeld_OrangePlastics-768x412.jpg 768w, https:\/\/orangeplastics.com\/wp-content\/uploads\/2026\/03\/ShortShot_Voorbeeld_OrangePlastics-1536x824.jpg 1536w, https:\/\/orangeplastics.com\/wp-content\/uploads\/2026\/03\/ShortShot_Voorbeeld_OrangePlastics.jpg 1919w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n<p><em>Example of an injection molding defect: short shot product<\/em><\/p>\n\n<section class=\"wp-block-qi-blocks-columns qodef-gutenberg-section qodef--template qodef-block-930a649e qodef-col-num--1 qodef-col-layout--100 qodef-content--boxed\"><div class=\"qodef-section-background-overlay\"><\/div><div class=\"qodef-gutenberg-row\">\n<div class=\"wp-block-qi-blocks-column qodef-gutenberg-column qodef-block-537c9e0c qodef-vertical-align--middle qodef-horizontal-align--center\"><div class=\"qodef-gutenberg-column-inner\">\n<h4 class=\"wp-block-heading has-text-align-center has-white-color has-text-color has-link-color wp-elements-5e8142d47f15b3da36b9cb2a34823522\" id=\"let-op-ontwerp-bepaalt-het-succes-bij-spuitgieten\">TIP<\/h4>\n\n\n\n<p class=\"has-text-align-center has-white-color has-text-color has-link-color wp-elements-8d02e36c2a9364e73d7456ae241b3701\">Digital mold flow simulations are highly valuable for predicting and preventing short shots in advance.<\/p>\n<\/div><\/div>\n<\/div><\/section>\n\n<h2 class=\"wp-block-heading\" id=\"hoe-werkt-spuitgieten-1-1-1\" style=\"font-size:40px\"><br\/>4. Burn marks<\/h2>\n\n<p>Burn marks are a noticeable injection molding defect that is immediately visible on the surface of a product. They are usually caused by issues with temperature control or insufficient venting of the mold. In this section, we explain what burn marks are, what causes them, and which measures can be taken to easily prevent them.  <\/p>\n\n<h3 class=\"wp-block-heading\" id=\"1-smelten-van-het-kunststofgranulaat-1-1-1-1-2-1-1\" style=\"font-size:30px\">What are burn marks?<\/h3>\n\n<p>Burn marks are <strong>black or rust-colored discolorations<\/strong> on the surface of a product.<\/p>\n\n<h3 class=\"wp-block-heading\" id=\"1-smelten-van-het-kunststofgranulaat-1-1-1-1-2-1-1-1\" style=\"font-size:30px\">What causes them?<\/h3>\n\n<p>Burn marks are caused by:<\/p>\n\n<ul class=\"wp-block-list\">\n<li>Overheating<\/li>\n\n\n\n<li>Trapped air in the mold<\/li>\n<\/ul>\n\n<h3 class=\"wp-block-heading\" id=\"1-smelten-van-het-kunststofgranulaat-1-1-1-1-2-1-1-1-1\" style=\"font-size:30px\">Solutions<\/h3>\n\n<p>To resolve burn marks, you can:<\/p>\n\n<ul class=\"wp-block-list\">\n<li>Lower the temperature<\/li>\n\n\n\n<li>Reduce the injection speed<\/li>\n\n\n\n<li>Add venting channels or gas vents<\/li>\n<\/ul>\n\n<p>Although burn marks are often only an aesthetic issue, they are relatively easy to prevent with proper mold ventilation.<\/p>\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"606\" src=\"https:\/\/orangeplastics.com\/wp-content\/uploads\/2026\/03\/Meest-voorkomende-spuitgietdefecten-burn-marks-1024x606.jpg\" alt=\"\" class=\"wp-image-13812\" srcset=\"https:\/\/orangeplastics.com\/wp-content\/uploads\/2026\/03\/Meest-voorkomende-spuitgietdefecten-burn-marks-1024x606.jpg 1024w, https:\/\/orangeplastics.com\/wp-content\/uploads\/2026\/03\/Meest-voorkomende-spuitgietdefecten-burn-marks-300x178.jpg 300w, https:\/\/orangeplastics.com\/wp-content\/uploads\/2026\/03\/Meest-voorkomende-spuitgietdefecten-burn-marks-768x455.jpg 768w, https:\/\/orangeplastics.com\/wp-content\/uploads\/2026\/03\/Meest-voorkomende-spuitgietdefecten-burn-marks-1536x910.jpg 1536w, https:\/\/orangeplastics.com\/wp-content\/uploads\/2026\/03\/Meest-voorkomende-spuitgietdefecten-burn-marks.jpg 1920w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n<p><em>Example of an injection molding defect: burn marks on plastic.<\/em><\/p>\n\n<h2 class=\"wp-block-heading\" id=\"hoe-werkt-spuitgieten-1-1-1-1\" style=\"font-size:40px\"><br\/>5. Warping<\/h2>\n\n<p>Warping is a common <strong>deformation issue<\/strong> in <a href=\"https:\/\/orangeplastics.com\/en\/injection-molding\/\">injection molding<\/a> that can negatively affect the dimensional accuracy and functionality of a product. It is caused by <strong>uneven shrinkage<\/strong> during the cooling process and is especially common in complex or asymmetrical designs. This section explains what warping is, its causes, and how deformation can be prevented.  <\/p>\n\n<h3 class=\"wp-block-heading\" id=\"1-smelten-van-het-kunststofgranulaat-1-1-1-1-2-1-1-1-1-1\" style=\"font-size:30px\">What is warping?<\/h3>\n\n<p>Warping is a<strong> deformation<\/strong> that occurs when different parts of a product shrink unevenly during cooling, similar to how wood can warp.<\/p>\n\n<h3 class=\"wp-block-heading\" id=\"1-smelten-van-het-kunststofgranulaat-1-1-1-1-2-1-1-1-1-1-1\" style=\"font-size:30px\">Common causes<\/h3>\n\n<p>The causes of warping include:<\/p>\n\n<ul class=\"wp-block-list\">\n<li>Too fast or uneven cooling<\/li>\n\n\n\n<li>Inconsistent wall thickness<\/li>\n\n\n\n<li>Asymmetrical designs<\/li>\n\n\n\n<li>Tension in material<\/li>\n<\/ul>\n\n<h3 class=\"wp-block-heading\" id=\"1-smelten-van-het-kunststofgranulaat-1-1-1-1-2-1-1-1-1-1-1-1\" style=\"font-size:30px\">Solutions<\/h3>\n\n<p>Warping can be resolved by:<\/p>\n\n<ul class=\"wp-block-list\">\n<li>Optimizing the cooling process<\/li>\n\n\n\n<li>Redesigning the product with uniform wall thickness<\/li>\n\n\n\n<li>Ensuring a symmetrical design where possible<\/li>\n<\/ul>\n\n<figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"606\" src=\"https:\/\/orangeplastics.com\/wp-content\/uploads\/2026\/03\/Meest-voorkomende-spuitgietdefecten-warping-1024x606.jpg\" alt=\"\" class=\"wp-image-13814\" srcset=\"https:\/\/orangeplastics.com\/wp-content\/uploads\/2026\/03\/Meest-voorkomende-spuitgietdefecten-warping-1024x606.jpg 1024w, https:\/\/orangeplastics.com\/wp-content\/uploads\/2026\/03\/Meest-voorkomende-spuitgietdefecten-warping-300x178.jpg 300w, https:\/\/orangeplastics.com\/wp-content\/uploads\/2026\/03\/Meest-voorkomende-spuitgietdefecten-warping-768x455.jpg 768w, https:\/\/orangeplastics.com\/wp-content\/uploads\/2026\/03\/Meest-voorkomende-spuitgietdefecten-warping-1536x910.jpg 1536w, https:\/\/orangeplastics.com\/wp-content\/uploads\/2026\/03\/Meest-voorkomende-spuitgietdefecten-warping.jpg 1920w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n<p><em><em><em>Example of an injection molding defect: warping<\/em><\/em><\/em><\/p>\n\n<h2 class=\"wp-block-heading\" id=\"hoe-kies-je-de-juiste-matrijs-en-machine\" style=\"font-size:40px\"><br\/>Prevention: the bigger picture<\/h2>\n\n<p>Although the causes often seem simple, solving injection molding defects can be complex. When you adjust one parameter, for example by increasing the temperature, other defects may appear. That is why a holistic approach is essential when <a href=\"https:\/\/orangeplastics.com\/engineering\/\">producing a plastic part<\/a>.  <\/p>\n\n<p>An experienced injection molding partner helps you optimize:<\/p>\n\n<ul class=\"wp-block-list\">\n<li>Material temperature<\/li>\n\n\n\n<li>Injection speed<\/li>\n\n\n\n<li>Mold design<\/li>\n\n\n\n<li>Cooling configuration<\/li>\n\n\n\n<li>Material choice<\/li>\n\n\n\n<li>Budget for molds and equipment<\/li>\n<\/ul>\n\n<p>This ensures a reliable and efficient production process.<\/p>\n\n<h2 class=\"wp-block-heading\" id=\"conclusie\" style=\"font-size:40px\"><br\/>Conclusion<\/h2>\n\n<p>Common injection molding defects such as sink marks, flow lines, short shots, burn marks, and warping are often caused by design or process-related issues. By properly aligning <strong>material<\/strong> selection, <strong>mold design<\/strong>, <strong>injection parameters<\/strong>, and <strong>cooling<\/strong>, these defects can be effectively prevented. A holistic approach with an experienced injection molding partner ensures a reliable and high-quality final product.  <\/p>\n\n<section class=\"wp-block-qi-blocks-columns qodef-gutenberg-section qodef--template qodef-block-3acbbf35 qodef-col-num--1 qodef-col-layout--100 qodef-content--boxed\"><div class=\"qodef-section-background-overlay\"><\/div><div class=\"qodef-gutenberg-row\">\n<div class=\"wp-block-qi-blocks-column qodef-gutenberg-column qodef-block-79086a92 qodef-horizontal-align--start\"><div class=\"qodef-gutenberg-column-inner\">\n<h3 class=\"wp-block-heading has-white-color has-text-color has-link-color wp-elements-43dfdc6224cfd9c25d75438f9bc132b2\" id=\"uw-product-laten-ontwikkelen\" style=\"font-size:40px\">Want to have your product developed?<\/h3>\n\n\n\n<p class=\"has-white-color has-text-color has-link-color wp-elements-831c02f4ba4694b59e0b6cb55ac18265\" id=\"uw-product-laten-ontwikkelen\">Do you have a product idea or want a quick price estimate? Contact us and we will assist you right away. <\/p>\n\n\n\n<div class=\"wp-block-qi-blocks-spacer qodef-block-container qodef-block-62b1e08b\"><div class=\"qi-block-spacer qodef-block qodef-m\"><\/div><\/div>\n\n\n\n<div class=\"wp-block-buttons is-layout-flex wp-block-buttons-is-layout-flex\">\n<div class=\"wp-block-button is-style-fill\"><a class=\"wp-block-button__link has-white-color has-text-color has-background has-link-color wp-element-button\" href=\"https:\/\/orangeplastics.com\/en\/price-indication\/\" style=\"background-color:#f6861f\">Need your product developed?<\/a><\/div>\n<\/div>\n<\/div><\/div>\n<\/div><\/section>\n\n<p><\/p>\n","protected":false},"excerpt":{"rendered":"<p>During the injection molding process, molten plastic is injected into a mold under high pressure. The material flows through the mold, fills the cavity, and solidifies within seconds. But in that short time, many things can go wrong. In this blog, we discuss the five most common injection molding defects and how to effectively resolve [&hellip;]<\/p>\n","protected":false},"author":4,"featured_media":13813,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[173,172],"tags":[],"class_list":["post-14102","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-about-injection-molding","category-orange-plastics-news"],"_links":{"self":[{"href":"https:\/\/orangeplastics.com\/en\/wp-json\/wp\/v2\/posts\/14102","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/orangeplastics.com\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/orangeplastics.com\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/orangeplastics.com\/en\/wp-json\/wp\/v2\/users\/4"}],"replies":[{"embeddable":true,"href":"https:\/\/orangeplastics.com\/en\/wp-json\/wp\/v2\/comments?post=14102"}],"version-history":[{"count":5,"href":"https:\/\/orangeplastics.com\/en\/wp-json\/wp\/v2\/posts\/14102\/revisions"}],"predecessor-version":[{"id":14123,"href":"https:\/\/orangeplastics.com\/en\/wp-json\/wp\/v2\/posts\/14102\/revisions\/14123"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/orangeplastics.com\/en\/wp-json\/wp\/v2\/media\/13813"}],"wp:attachment":[{"href":"https:\/\/orangeplastics.com\/en\/wp-json\/wp\/v2\/media?parent=14102"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/orangeplastics.com\/en\/wp-json\/wp\/v2\/categories?post=14102"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/orangeplastics.com\/en\/wp-json\/wp\/v2\/tags?post=14102"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}